Calibration
Mechanical, thermal and electro thermal calibration
Mechanical
Quantity Measured / Instrument | Range/Frequency | *Calibration Measurement Capability (±) | Remarks |
Vernier Caliper L.C.: 0.01 mm |
0 to 300 mm | 19.0 μm | Using Slip Gauge Set & Accessories |
External Micrometer L. C. 0.001 mm |
0 to 25 mm 25 to 50 mm |
1.8μm | Using Slip Gauge Set & Accessories |
Dial / Wobble Gauge (Analog/Dial/Digital) LC: 0.001 mm |
0 to 25 mm | 3.0 μm | Using Slip Gauge Set & Comparator with Stand |
Thickness Gauge (Dial/Digital) LC: 0.001 mm |
0 to 25 mm | 2.7 μm | Using Slip Gauge Set & Accessories |
Depth Gauge Depth Gauge (Dial/Digital) LC : 0.1 mm |
0 to 30 mm | 58 μm | Using Slip Gauge Set & Accessories |
Measuring Scale LC: 0.5 mm |
0 to 600 mm | 583 μm | Using travelling Height Gauge & Stereo Microscope |
Plug Gauge | 0 to 50 mm | 1.9 μm | Using Slip Gauge Set & Comparator with Stand |
Mandrel (Diameter only) |
0 to 50 mm | 2.0 μm | Using Slip Gauge Set & Comparator with Stand |
Quantity Measured / Instrument | Range/Frequency | *Calibration Measurement Capability (±) | Remarks |
Sound Level Meter | 94 dB & 114 dB | 0.60 dB | Using Sound Calibrator |
Quantity Measured / Instrument | Range/Frequency | *Calibration Measurement Capability (±) | Remarks |
Tachometer/Stroboscope/ RPM of Centrifuge | 50 to 20000 RPM | 0.14 % | Using Precision Digital Tachometer By Comparison Method |
Quantity Measured / Instrument | Range/Frequency | *Calibration Measurement Capability (±) | Remarks |
Mass / Weights | 1 mg | 0.003 mg | Using E1 Class standard weights up to 200 g and Digital Weighing Balance upto 32 g of d=0.001 mg and upto 200 g and d=0.01 mg, by ABBA method as per OIML R-111 : 2004 and NABL 122-02 For Calibration of F1 class weights and coarser |
2 mg | 0.003 mg | ||
5 mg | 0.003 mg | ||
10 mg | 0.003 mg | ||
20 mg | 0.003 mg | ||
50 mg | 0.003 mg | ||
100 mg | 0.003 mg | ||
200 mg | 0.003 mg | ||
500 mg | 0.006 mg | ||
1 g | 0.006 mg | ||
2 g | 0.006 mg | ||
5 g | 0.006 mg | ||
10 g | 0.014 mg | ||
20 g | 0.014 mg | ||
50 g | 0.024 mg | ||
100 g | 0.024 mg | ||
200 g | 0.100 mg |
Mass / Weights | 500 g | 1.7 mg | Using F1 class weights and Digital weighing balance upto 3200 g with d=1 mg, upto 65 kg with d=1 g by ABBA method as per OIML R-111 : 2004 and NABL 122-02 For Calibration of M1 class weights and coarser |
1 kg | 1.9 mg | ||
2 kg | 10.7 mg | ||
5 kg | 0.82 g | ||
10 kg | 0.84 g | ||
20 kg | 0.88 g | ||
50 kg | 1.0 g |
Quantity Measured / Instrument | Range/Frequency | *Calibration Measurement Capability (±) | Remarks |
Calibration of Weighing Balance | 1 mg to 32 g d=0.001 mg |
0.03 mg | Calibration of Electronic Weighing Balance of Class-I and coarser using standard weights (E1 Class) as per OIML R-76-1:2006 and NABL-122-03 |
> 32 g to 200 g d=0.01 mg and coarser |
0.06 mg | ||
> 205 g to 3200 g d=1 mg and coarser |
11.9 mg | Calibration of Electronic Weighing Balance of Class-II and Class-III and coarser using standard weights (F1 Class) as per OIML R-76-1:2006 and NABL-122-03 | |
> 3.2 kg to 10 kg d=10 mg and coarser |
30.0 mg | ||
> 10 kg to 50 kg d=1 g and coarser |
2.5 g |
Quantity Measured / Instrument | Range/Frequency | *Calibration Measurement Capability (±) | Remarks |
Calibration of Piston Pipette | 10 µl to 100 µl 100 µl to 1000 µl |
0.08 µl | Using Digital Precision Balance and distilled water of known density as per IS : 8655-6 and NABL 122-04 |
Calibration of Volume (Glassware) | > 1 ml to 25 ml | 6.4 µl | Using Digital Precision Balance and distilled water of known density as per ISO : 4787 & NABL 122-04 |
> 1 ml to 50 ml | 6.4 µl | ||
> 1 ml to 100 ml | 20.0 µl | ||
> 100 ml to 1000 ml | 110.0 µl |
* Measurement Capability is expressed as an uncertainty () at a confidence probability of 95%
$Only in Permanent Laboratory
♣Only for Site Calibration
# The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master