Testing
NABL Certified testing laboratory. Testing of Fibre, Yarn, Fabric, Garment, Functional textile, geotextile, non woven, performance textile, automotive textile, medical textile, industrial textile, clothtech, packtech, composites, heat and flame testing, chemical analysis of fibre, fabric, chemicals, auxillaries and dyes, solid fuel testing, drinking water analysis, trace analysis of heavy metals, banned amines, formaldehydes etc.
Composite
ATIRA has state of the art facility to develop prototypes and testing of composites
- Tensile strength ( Ambient temp)(Up to Thickness 8mm)
- Tensile Elongation(with extensometer)
- Tensile Modulus (with extensometer) (> Thickness 8 mm)
- Flexural strength
- Compression strength
- Ultimate Bearing strength
- Notching charges
- Poission Ratio
- In-plane shear strength
- VICAT
- Density
- Water Absorption (24 Hrs)
- DMA Tg
- Full section shear modulus ( 3-Point Bending method)
- Instrumented Puncture Impact test
- Laminate Making by Infusion method
- Chipping test
- Fatigue test for composites in Tensile, compression & torsion mode.
- Tensile Modulus (with extensometer) (Up to Thickness 8 mm)
- Tensile strength ( Ambient temp)(> Thickness 8mm)
- Tensile Elongation(with extensometer)(> Thickness 8 mm)
- Flexural Modulus(without extensometer)
- Compression Modulus (without extensometer)
- Izod Impact strength
- Charpy Impact strength
- Short Beam strength/ILSS
- HDT
- Barcol Hardness
- Glass content/Fibre Volume Fraction
- DSC Tg
- Full section MOE( 3-Point Bending method)
- Full section (Buckling/compression)
- Resin cast sheet making
- Lap Shear strength
- UDL (Uniform Distribution Lod)
- Cone Calorimeter
- IMO/ Lift Spread of Flame
- NBS Smoke Density Chamber
- Toxicity Index
- Flooring Radiant Panel
- Limiting Oxygen index
- Single Flame Source Test
- Flammability
- Dry Arc Resistance
- Comparative Tracking
- Glow Wire Test
- Di Electric Hi voltage